Description
This is an 04-08 S1 rx8 6 port MANUAL trans engine. This does not fit any 09-11 models or any automatic models.
SHIPPING/TRANSPORT IS NOT INCLUDED IN THE PRICE OF THIS ENGINE.
You are buying this engine outright, out the door, with no core exchange required. IF you have one or more cores you want to trade in toward this I can do so, but I cannot tell you how much I can offer until I have disassembled and inspected your core to see what is reusable inside it. So, your core can be worth $0-500 depending on condition, and core exchange only works for buyers able to deliver their core in person because the cost of freight is too much to gamble on an unknown condition core.
This engine was built from very good, low-wear, above-average-condition used major components such as rotors/shaft/iron housings. The build received used rotor housings with light wear, what I define as “A condition” and at this point these parts are about as nice of parts as you can find. The rotor housing chrome surface was lightly resurfaced to remove light top level defects and make the sealing surface a bit more uniform (this service is offered by some other vendors for as much as $350 for two housings alone but is included in the build cost here).
Also built with oem mazda apex seals/springs, oem corner seals/springs, oem cut-to-fit side seals/springs, viton oil orings, thermal pellet for the front eshaft, OEM coolant seals etc., new front/rear main oil seals, new front cover gasket, and new & rotor main bearings. The original matching flywheel has been freshly machined and installed along with a new oem pilot bearing & seal.
The oil pressure regulator was modified for slightly higher peak oil pressure. Engine end play was checked twice during assembly and the coolant seals/passages were pressurized to 20psi for half an hour to ensure against leaks/assembly error.
Engine is sold without warranty. Buyer will receive a disc with all the photos of the parts used and assembly, written invoice, and a full paperwork packet of startup and break in suggestions.
**********************FREIGHT SHIPPING FOR THOSE NOT PICKING UP IN EAST TN*********************************************
SHIPPING IS NOT INCLUDED IN THE PRICE OF THE ENGINE. Local pickup in east TN is recommended.
Engines must ship semi truck freight on a pallet and only to buyers in the 48 continental US. Freight industry standard is that deliveries go to a business location with ability to unload the pallet from the chest-height semi trailer (dock, ramp, forklift etc.).
Freight rates vary weekly depending on destination, weight, whether or not insurance is selected, and carrier/company used, and there is no way for this website to accurately convey freight costs for each viewer. A good estimate for the eastern and central US (east of the Miss. River) is somewhere around $300-450, and western US (west of the Miss. River) somewhere around $400-650.
You will have to inquire with me, hopefully before purchase, for an estimate or exact quote. Information I need to know in order to generate a quote is:
-zipcode
-is destination a business location or residential area
-is destination limited access, special hours, advance notification required, gated, etc.
-will you unload the pallet from the chest-height semi trailer (dock, ramp, forklift, or 2-3 strong guys by hand)? or do you require optional, higher cost liftgate unloading-to-ground-level?
Once a quote is gathered and shipping terms are agreed on, I can:
-allow the customer to set up and pay for the freight shipping directly themselves, using information I provide
or
-set the freight shipping up myself, and add the shipping cost to the purchase price of this listing (if the customer has not already purchased/paid for this engine listing)
or
-if the customer has already paid for this listing but the customer wants me to set the freight shipping up myself, I can send another, separate invoice for payment via CC, for the extra shipping costs.
Reviews
There are no reviews yet.