04-11 rx8 engine oil cooler lines/hoses/pipes full set for dual cooler (manual, some auto) models

04-11 rx8 engine oil cooler lines/hoses/pipes full set for dual cooler (manual, some auto) models (check for one oil cooler under each headlight). Includes most hardware including banjo bolts, copper crush washers, and mounting brackets for the frame.

Removed from an 04 manual model with unknown mileage, car was already disassembled when it came to me so these could not be run tested. They have mild rust in places but I was able to disassemble all of the joints. Would make good replacements for those up north in the rust belt with seized or leaking lines. Also good for those with contaminated lines from a bearing-failure-engine. Or good for those with only one oil cooler who want to add a second (04-05 auto models, some 09-11 auto models)

Includes the two engine-side connections (for 04-08 models only, do not fit 09-11 models) plus all the rest of the pipes and connections to, and between, the two oil coolers themselves (these sections fit all 04-11 models but you will have to reuse your original engine-side-lines). To buy all of these lines new from mazda would run well over $1000.