Skip to content

89-91 rx7 6 port non turbo engine block pre-built w/o flywheel

$2,399.00

Category:

Description

**NOTE: PENDING WEBSITE UPDATES, SHIPPING WILL CURRENTLY BE HANDLED ON A CASE BY CASE BASIS AND INVOICED FOR ACTUAL COST AFTER PURCHASE IN ADDITION TO THE COST OF THE ENGINE ITSELF. SHIPPING IS DONE VIA SEMI TRUCK TO A BUSINESS LOCATION. EXPECT $275 FOR EASTERN US, 325 FOR CENTRAL US AND 375 FOR WESTERN US. OPTIONAL RESIDENTIAL DELIVERY COSTS EXTRA.***

 

This engine is a direct fit for all 89-91 rx7 non turbo 6 port models. It does not fit any turbo models.

This engine is being SOLD OUTRIGHT WITH NO CORE RETURN REQUIRED. However, if you have a core (or more than one) or core components that you wish to trade in for some credit off of the price, I will gladly do so. However in order to determine how much credit I can give you I would need to see the cores or parts I am buying first, so you would either need to ship or deliver the core/parts to me first. You could expect $300-600 on average.

This engine was built from various core components that came to me in one or more core engines and the major components are “B-condition” used parts with moderate wear.

The rotor housings used in this build were “resurfaced” for a smoother (but still imperfect) chrome compression sealing surface. Other shops that offer this “resurfacing” process charge $300 per pair of housings plus round trip shipping for their service, I am including it free in the cost of this build.

The engine was built with the following new seals etc.:

-atkins rotary 2mm 2 piece apex seals w/ short/long springs

-oem mazda corner seals

-oem mazda rx8 corner springs

-oem mazda side seals (cut to fit hand clearanced)

-atkins rotary side springs

-atkins rotary viton oil control o-rings

-atkins rotary thermal pellet

-oem front and rear main oil seal

-oem coolant seal set

-oem main bearings

-oem rotor bearings

This engine does not include a flywheel.

The oil pressure regulator has been modified to increase oil pressure and hopefully combat bearing wear and other oiling issues. Endplay was checked twice during assembly. The block coolant passages were pressurized to 20psi for half an hour to be certain that the coolant seals are correct and there are no internal coolant passage leaks or cracks. This engine is accompanied by a written 1 year unlimited mileage warranty against builder assembly error. The buyer will also receive a written invoice, a thorough set of startup/break in instructions, as well as all of the pictures of the part used in the build and assembly.

Reviews

There are no reviews yet.

Be the first to review “89-91 rx7 6 port non turbo engine block pre-built w/o flywheel”

Your email address will not be published. Required fields are marked *